Rapport de durabilité
La nouvelle règle du jeu pour une finance responsable.

Depuis 2024, la réglementation européenne exige que chaque entreprise financière publie des indicateurs de durabilité qui offrent une vision transparente de l'impact environnemental de ses activités.
En quelques mots, ces indicateurs prouvent qu'une entreprise agit concrètement pour la planète.
Explorez ci-dessous les indicateurs de durabilité des crypto-actifs sélectionnés par notre plateforme.

Sustainability report
The new rule of the game for responsible finance.
Polkadot (DOT)
General Information
| Reporting entity name | Coinhouse SAS |
| Legal Entity Identifier (LEI) | 969500E5GFHK2RKF8251 |
| Crypto-asset name | Polkadot DOT |
| Consensus mechanism | Polkadot DOT is present on the following networks: Astar, Polkadot, Statemint. |
| Incentive mechanisms and applicable fees | Polkadot DOT is present on the following networks: Astar, Polkadot, Statemint. |
| Start of reporting period | 2025-11-14 |
| End of reporting period | 2026-11-14 |
Environmental (E)
| Total energy consumption (kWh/year) | 642546.00000 |
| Energy consumption sources and calculation methodologies | The energy consumption of this asset is aggregated across multiple components: |
| Share of renewable energy consumption (%) | 39.006235068 |
| Energy intensity (kWh/transaction) | 0.00004 |
| Scope 1 GHG emissions (tCO₂e) | 0.00000 |
| Scope 2 GHG emissions (tCO₂e) | 190.07953 |
| GHG emissions intensity (gCO₂e/tx) | 0.00001 |
| Key energy sources and methodologies | To determine the proportion of renewable energy usage, the locations of the nodes are to be determined using public information sites, open-source crawlers and crawlers developed in-house. If no information is available on the geographic distribution of the nodes, reference networks are used which are comparable in terms of their incentivization structure and consensus mechanism. This geo-information is merged with public information from Our World in Data, see citation. The intensity is calculated as the marginal energy cost wrt. one more transaction. |
| Key GHG sources and methodologies | To determine the GHG Emissions, the locations of the nodes are to be determined using public information sites, open-source crawlers and crawlers developed in-house. If no information is available on the geographic distribution of the nodes, reference networks are used which are comparable in terms of their incentivization structure and consensus mechanism. This geo-information is merged with public information from Our World in Data, see citation. The intensity is calculated as the marginal emission wrt. one more transaction. |
Polkadot DOT is present on the following networks: Astar, Polkadot, Statemint.
Astar operates as a parachain connected to the Polkadot Relay Chain. Astar collators collect transactions and produce candidate blocks, while Polkadot validators validate parachain state transitions and provide finality through the relay-chain consensus.
Polkadot uses Nominated Proof of Stake to select a validator set backed by DOT nominators. BABE assigns block-production opportunities to validators, and GRANDPA finalizes relay-chain blocks after the required validator agreement. Relay-chain validators also verify parachain state-transition candidates submitted by collators.
Statemint was renamed Polkadot Asset Hub. It is a Polkadot system parachain whose collators assemble candidate blocks and submit them to Polkadot relay-chain validators. Relay-chain validators verify parachain state transitions, and Polkadot consensus provides finality for accepted Asset Hub blocks.
Polkadot DOT is present on the following networks: Astar, Polkadot, Statemint.
Transactions and smart-contract execution on Astar incur fees in ASTR under the applicable weight and gas rules. Astar’s dApp Staking mechanism distributes ASTR rewards to eligible stakers and registered dApps under the protocol’s current reward parameters.
Validators and nominators receive DOT staking rewards after validator commission and may be subject to slashing for defined offences. Users pay transaction fees based on transaction weight, encoded length, and any optional tip. Parachains obtain execution capacity through Polkadot’s coretime mechanisms, which are separate from ordinary transaction fees.
Polkadot validators receive DOT staking rewards under Polkadot relay-chain rules. Polkadot Asset Hub collators do not receive inflation-funded era rewards and may receive a portion of transaction fees. Users pay fees in DOT or an eligible supported asset, and some asset-management operations require deposits or reserves.
The energy consumption of this asset is aggregated across multiple components:
For the calculation of energy consumptions, the so called ‘bottom-up’ approach is being used. The nodes are considered to be the central factor for the energy consumption of the network. These assumptions are made on the basis of empirical findings through the use of public information sites, open-source crawlers and crawlers developed in-house. The main determinants for estimating the hardware used within the network are the requirements for operating the client software. The energy consumption of the hardware devices was measured in certified test laboratories. When calculating the energy consumption, we used – if available – the Functionally Fungible Group Digital Token Identifier (FFG DTI) to determine all implementations of the asset of question in scope and we update the mappings regulary, based on data of the Digital Token Identifier Foundation. The information regarding the hardware used and the number of participants in the network is based on assumptions that are verified with best effort using empirical data. In general, participants are assumed to be largely economically rational. As a precautionary principle, we make assumptions on the conservative side when in doubt, i.e. making higher estimates for the adverse impacts.
For the calculation of energy consumptions, the so called ‘bottom-up’ approach is being used. The nodes are considered to be the central factor for the energy consumption of the network. These assumptions are made on the basis of empirical findings through the use of public information sites, open-source crawlers and crawlers developed in-house. The main determinants for estimating the hardware used within the network are the requirements for operating the client software. The energy consumption of the hardware devices was measured in certified test laboratories. When calculating the energy consumption, we used – if available – the Functionally Fungible Group Digital Token Identifier (FFG DTI) to determine all implementations of the asset of question in scope and we update the mappings regulary, based on data of the Digital Token Identifier Foundation. The information regarding the hardware used and the number of participants in the network is based on assumptions that are verified with best effort using empirical data. In general, participants are assumed to be largely economically rational. As a precautionary principle, we make assumptions on the conservative side when in doubt, i.e. making higher estimates for the adverse impacts.
To determine the energy consumption of a token, the energy consumption of the network(s) astar is calculated first. For the energy consumption of the token, a fraction of the energy consumption of the network is attributed to the token, which is determined based on the activity of the crypto-asset within the network. When calculating the energy consumption, the Functionally Fungible Group Digital Token Identifier (FFG DTI) is used – if available – to determine all implementations of the asset in scope. The mappings are updated regularly, based on data of the Digital Token Identifier Foundation. The information regarding the hardware used and the number of participants in the network is based on assumptions that are verified with best effort using empirical data. In general, participants are assumed to be largely economically rational. As a precautionary principle, we make assumptions on the conservative side when in doubt, i.e. making higher estimates for the adverse impacts.
To determine the proportion of renewable energy usage, the locations of the nodes are to be determined using public information sites, open-source crawlers and crawlers developed in-house. If no information is available on the geographic distribution of the nodes, reference networks are used which are comparable in terms of their incentivization structure and consensus mechanism. This geo-information is merged with public information from Our World in Data, see citation. The intensity is calculated as the marginal energy cost wrt. one more transaction.
Ember (2025); Energy Institute – Statistical Review of World Energy (2024) – with major processing by Our World in Data. “Share of electricity generated by renewables – Ember and Energy Institute” [dataset]. Ember, “Yearly Electricity Data Europe”; Ember, “Yearly Electricity Data”; Energy Institute, “Statistical Review of World Energy” [original data]. Retrieved from https://ourworldindata.org/grapher/share-electricity-renewables.
To determine the GHG Emissions, the locations of the nodes are to be determined using public information sites, open-source crawlers and crawlers developed in-house. If no information is available on the geographic distribution of the nodes, reference networks are used which are comparable in terms of their incentivization structure and consensus mechanism. This geo-information is merged with public information from Our World in Data, see citation. The intensity is calculated as the marginal emission wrt. one more transaction.
Ember (2025); Energy Institute – Statistical Review of World Energy (2024) – with major processing by Our World in Data. “Carbon intensity of electricity generation – Ember and Energy Institute” [dataset]. Ember, “Yearly Electricity Data Europe”; Ember, “Yearly Electricity Data”; Energy Institute, “Statistical Review of World Energy” [original data]. Retrieved from https://ourworldindata.org/grapher/carbon-intensity-electricity Licenced under CC BY 4.0.


